70,000 mm x 110,000 mm x 20,000 mm NTN 6014LU deep groove ball bearings

s1:48.4 mm; N:20mm; J:171 mm; L:219 mm; L1:70 mm; T max.:100 °C; C:43.55 kN; Weight:3.98 kg; Designation of housing:P211-; B:55.4 mm;

L1:49 mm; A1:27 mm; Recommended tightening torque for set screw:8 Nm; A:45 mm; C0:15.2 kN; L:163 mm; S:17.5 mm; Weight:1.51 kg; Z:21.5 mm; N:14mm;

db min:99.5 mm; d1:106.2 mm; D1:118.75 mm; Characteristic cage frequency, FTF:0.46 Hz; Db max:125.5 mm; Static load, C0:43.8 kN; Axial displacement K Factor:0.44; Precision class:P4; Min operating temperature, Tmin:-30 °C; ra max:0.6 mm;

C0:15.2 kN; SW:3.97 mm; A1:12 mm; G:M6x1; Recommended tightening torque for set screw:8 Nm; H1:89 mm; Designation of housing:T207-; N:22mm; N2:37 mm; L1:78 mm;

Radial clearance class:C3; Characteristic rolling element frequency, BSF:4.68 Hz; f0:13.8; Characteristic inner ring frequency, BPFI:5.42 Hz; Characteristic outer ring frequency, BPF0:3.58 Hz; rs min:1 mm; d:30 mm; D:62 mm; Brand:NTN; da min:35 mm;

B:22 mm; H2:54 mm; Z:42.9 mm; A:30 mm; Dz:46 mm; C:9.55 kN; G:M6x1; C0:4.78 kN; T min.:-40 °C; Designation of bearing:US202G2T04;

C:31.85 kN; d:44.45 mm; J:105 mm; T min.:-40 °C; C0:20.8 kN; T max.:100 °C; B:41.2 mm; A:38 mm; Designation of closed end cover:SCC209; Z:56.3 mm;

H1:22.5 mm; N1:30 mm; Dz:110 mm; L:222 mm; S:11.8 mm; B:45.3 mm; A:60 mm; Designation of bearing:US211G2T20; J:176 mm; s1:22.65 mm;

B1:46.8 mm; H1:80 mm; N2:36 mm; d1:42.8 mm; d:22.22 mm; Recommended tightening torque for set screw:8 Nm; Weight:1.33 kg; G:M6x1; L3:65 mm; A5:18.2 mm;

J:262 mm; N:27mm; L1:100 mm; L:327 mm; A:88 mm; Designation of bearing:EX218-56G2L3; S:24.5 mm; N1:33 mm; H2:200 mm; T min.:-20 °C;

d:40 mm; B:27 mm; Characteristic rolling element frequency, BSF:3.41 Hz; Max operating temperature, Tmax:120 °C; da min:49 mm; Radial clearance class:C4; Fatigue limit load, Cu:1.66 kN; Characteristic inner ring frequency, BPFI:4.45 Hz; Nlim (grease):7,000 rpm; Mass:1.23 kg;

L:165 mm; Dz:70 mm; L1:56 mm; Weight:1.76 kg; Recommended tightening torque for set screw:5.5 Nm; d:30 mm; Designation of bearing:US206G2T04; Designation of closed end cover:SCC206; J:121 mm; Designation of housing:PH206N-;

Bearing Duty:Normal Duty; Ball Grade:Class 10; Bearing Series:208 Series; Housing Type:2 Bolt Pillow Block; Ring Size:Standard; Shaft Attachment (2):Set Screw; Ball Bearing Housing Series:208 Series; Bearing Family:Setscrew Ball Bearin; Retainer Type:Std Retainer; Grease Type:Unirex N2;

T max.:100 °C; A1:33 mm; N:M12; E:22 mm; J:85 mm; H:53.9 mm; A:54 mm; C:31.85 kN; Designation of housing:PG209-; s1:24.6 mm;

T min.:-20 °C; T max.:200 °C; Weight:1.14 kg; H:161 mm; A:34 mm; A2:42.5 mm; S:8.5 mm; B:32 mm; Designation of housing:FL207N-; Recommended tightening torque for set screw:8 Nm;